Hakko

Replacement Heating Element for Hakko 807 Pencil style desoldering handpiece..

3.0mm ID Nozzle for 851-2 SMD Hot Air Rework Station..

Hakko 472 refurbished self-contained Analog Desoldering Station with 807 pencil-style handpiece, NEW 60 watt heater, new seals/filters. Handpiece holder*, Operators Manual. 115vac, 60Hz, three wire cord.*Note: Handpiece holder may be mounted on the side of the station instead of a separate stand as the picture shows__SPECIAL BONUS:  2 Desoldering tips of your choice FREE with purchase of any Hakko desoldering station ($34 value)...

Hakko 611-2 weighted base double roll solder spool holder for two each 1 pound solder rolls (not included)...

Several Sizes and models of Soldering Tips:Hakko 900M-T-0.8D Chisel Tip 0.8mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-1.2D Chisel Tip 1.2mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-1.2LD Long Chisel Tip 1.2mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-1.6D Chisel Tip 1.6mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-2.4D Chisel Tip 2.4mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-3.2D Chisel Tip 3.2mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-4C 45 Degree Bevel Tip 0.158" wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-I Conical Tip 0.008" wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-SB Narrow Conical Tip 0.008" wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces...

Hakko 903 Replacement Handpiece for 939 High Performance Solder Station. Comes with 1.6mm Chisel Tip...

Hakko C1148 907 Replacement Medium Handpiece for 936, 937, 703, 928..

A1009 Ceramic Disc Filter (10 pack)  for "last chance" filter in the base power supply. When exhausted, replaced by A1611, same price of $8..

Ceramic Disc Filter for 817, 808, 809, 807, FR-41XX/300 (10 pack)..

Factory Refurbished 471-2 Desoldering Station requires 70 PSI shop air to create the vacuum, 802 gun-style handpiece, 50 watt heater, stand, manual, complete with accessories (spare filters,cleaning pin, etc) 120vac 60Hz__SPECIAL BONUS:  2 Desoldering tips of your choice FREE with purchase of any Hakko desoldering station ($34 value)...

Factory Refurbished 853-2  Preheater used to preheat a circuit board with large ground planes, heat shields, RF shields, etc., so the soldering iron can properly melt the solder 120vac 60Hz..

Refurbished 473-1 desoldering station requires 70 PSI shop air to create the vacuum, 807  60 Watt pencil-style handpiece, Handpiece holder, Operators Manual, 120vac 60Hz, 3 wire cord.___Note:  Handpiece holder may not be as depicted in the photo.  Holder may be mounted on the side of the station.___SPECIAL BONUS:  2 Desoldering tips of your choice FREE with purchase of any Hakko desoldering station ($34 value)...

Refurbished 703 or 703B  Digital Self-Contained Solder/Desolder Station with 2 each  907  50 Watt soldering handpieces and one 807 Desoldering handpiece with a new 60 Watt heater installed. 115VAC, 60 Hz three wire cord. operators manual.__NOTE: Handpiece stands may not be as depicted in the photo.  Desoldering Handpiece holder may be mounted on the side of the station.__SPECIAL BONUS:  2 Desoldering tips of your choice FREE with purchase of any Hakko desoldering station ($34 value)...

Refurbished 939-1 high performance digital soldering station, programmable temperature offset, temperature lockout feature, control card, 903 handpiece, stand, manual, ESD safe, 115vac, 60 Hz, 3 wire cord__SPECIAL - new spare A1245 2.4mm chisel tip included - Free..

Refurbished FP101-01 or FP102-01  high output, temperature controlled soldering station with new handpiece, utilizing composite tips with 70 watt heater and sensor built into the tip, 4 selectable heat ranges - 650, 700, 750, 800 degrees F, stand, manual, control key, 120vac, 60 Hz. (used tip included)...