Soldering

Single Hole Solder Sponge for many Weller and Hakko Soldering StationsMulti-hole Solder Sponge for many Weller and Hakko Soldering StationsSlitted Solder Sponge for many Weller and Hakko Soldering StationsSizes vary:2.6" x 2.6"2.4" x 3.2"2.7" x 4.5"3.2" x 1.9"

EDSYN European 951SX-230B Loner Soldering Station. An industry standard, highly dependable, cost efficient. accurate linear temperature control dial, 205 to 427 degrees C range, 70 watt heater, ESD safe, wide variety of soldering and SMT CROWN tips available, 230vac, 50Hz, 1 year warranty. Made in the USA.

An industry standard, highly dependable, cost efficient. accurate linear temperature control dial, 400-800 degrees F range, 95 watt heater, ESD safe, wide variety of soldering and SMT CROWN tips available, 120vac, 60Hz, extended 2 year warranty. Made in the USA.__BONUS SPECIAL- 2 spare multi-hole sponges, spare LT376 chisel tip, LT371 very small chisel tip (a $17 value FREE - while supply lasts)__NOTE: Special free items not available with Refurbished or Used items!

Heavy Duty BC Series Tips for 951SX and other Hollow Heater EDSYN handpiecesBC series tips - Requires RS271 Heavy Duty Retaining Sleeve

Replacement Element for the EDSYN EA439-C weighted base tip cleaner

SR298 EDSYN Hollow Heater Replacement Soldering Handpiece for 951SX and 952SX Soldering Stations.

Turned Brass in a Weighted Holder for use cleaning soldering iron tips instead of the hassle using a wet sponge.

3.0mm ID Nozzle for 851-2 SMD Hot Air Rework Station

Several Sizes and models of Soldering Tips:Hakko 900M-T-0.8D Chisel Tip 0.8mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-1.2D Chisel Tip 1.2mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-1.2LD Long Chisel Tip 1.2mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-1.6D Chisel Tip 1.6mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-2.4D Chisel Tip 2.4mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-3.2D Chisel Tip 3.2mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-4C 45 Degree Bevel Tip 0.158" wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-I Conical Tip 0.008" wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-SB Narrow Conical Tip 0.008" wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.

Hakko 903 Replacement Handpiece for 939 High Performance Solder Station. Comes with 1.6mm Chisel Tip.

Hakko C1148 907 Replacement Medium Handpiece for 936, 937, 703, 928

Factory Refurbished 853-2  Preheater used to preheat a circuit board with large ground planes, heat shields, RF shields, etc., so the soldering iron can properly melt the solder 120vac 60Hz

Refurbished 703 or 703B  Digital Self-Contained Solder/Desolder Station with 2 each  907  50 Watt soldering handpieces and one 807 Desoldering handpiece with a new 60 Watt heater installed. 115VAC, 60 Hz three wire cord. operators manual.__NOTE: Handpiece stands may not be as depicted in the photo.  Desoldering Handpiece holder may be mounted on the side of the station.__SPECIAL BONUS:  2 Desoldering tips of your choice FREE with purchase of any Hakko desoldering station ($34 value).

Refurbished 939-1 high performance digital soldering station, programmable temperature offset, temperature lockout feature, control card, 903 handpiece, stand, manual, ESD safe, 115vac, 60 Hz, 3 wire cord__SPECIAL - new spare A1245 2.4mm chisel tip included - Free

Refurbished FP101-01 or FP102-01  high output, temperature controlled soldering station with new handpiece, utilizing composite tips with 70 watt heater and sensor built into the tip, 4 selectable heat ranges - 650, 700, 750, 800 degrees F, stand, manual, control key, 120vac, 60 Hz. (used tip included).